USED Morris Morris / MJS-130 Natural [20]

Description

The MJS-130 is a Maurice dreadnought size MJS-130, which has established itself as an acoustic guitar brand.
Spruce top, rosewood sides and back.
Mahogany neck, gold pegs, Avalon rosette, tortoiseshell pickguard, and gloss finish give it a high-class appearance.

* After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted, and rubbed, so it is in good playing condition.

Overall, there are scratches, minor dents, and other signs of use.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fret : Less than 50%.
Attachment Soft case / Non-genuine
Country of Origin JAPAN
Weight 2.33kg
Serial No serial number

Truss Rod : No problem, confirmed up to 60 degrees left and right (slightly twisted)
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.4mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|21.3mm
Neck thickness(near 12th fret)|-
SCALE|652mm (25.66″)
RADIUS|305mm (12″)
Strings used for setup|Galli Strings / .012-.054 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight torsion).

Fret remainder
Defective, need to consider replacing at next repair.

String height (bass string side)
2.4mm above the 12th fret

String height (treble string side)
2.0mm above the 12th fret

Nut width
43.4mm

Neck Thickness (near 1st fret)
21.3mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
652mm (25.66″)

RADIUS
305mm (12″)

Strings for Setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment