Description
We are pleased to announce the arrival of the Rainmaker mod version of the popular Japanese brand Sugi’s U.S. manufacturing line.
Based on the Sugi DS499, this model has been redesigned with a longer scale and single-sided 6-pegs.
Alder body with Telecaster-like shape, maple neck, and maple fingerboard. The rear pickup can be coil-tapped with a mini-switch.
The highly playable shape with original design by Sugimoto and the tension of the long scale make this one of the most traditional American sounding and playable guitars.
The rear pickup has been replaced by a Suhr SSV Bridge and the front pickup by Vanzandt.
The tone pot is a switch pot, but it is not wired and is in dummy condition. There is a mini-switch under the selector, and the coil tap wiring has been replaced there.
There is a paint crack on the body back. There is a crack at the neck joint.
There are some scratches and dings.
The neck is almost straight and in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: U10061
Year of manufacture: 2013
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, Certificate
Weight: 3.6kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.7mm
SCALE: 648mm (25.5″)
RADIUS: 305mm (12″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
U10061
Year of manufacture
2013
Country of manufacture
United States of America
Case
Hard Case
Accessories
Arm, Certificate
Weight
3.6kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.0mm
Neck thickness near 1st fret
20.0mm
Neck thickness near 12th fret
22.7mm
Scale
648mm (25.5″)
RADIUS
305mm (12″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.