Description
A dreadnought style with the fundamentals down to the basics by domestic brand SWITCH Custom Guitars.
Composed of all solid, ultra-thin lacquer-finish Sitka spruce top, rosewood sides and back body, polyurethane coated African mahogany 1p neck, and ebony fingerboard. Hand crafted.
This is one that produces a bright, loud, yet delicate and grating, good quality sound at a great price, made of carefully selected top quality materials.
Pickups are installed.
There is a picking scratch on the left side of the sound hole.
Scratches, dents, and abrasions can be seen on the entire body.
The neck is slightly wavy, but in playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: 18048
Country of manufacture: Japan
Case: Non-issue gig case
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.2mm above 12th fret
String height on treble string side: 1.7mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 21.0mm
SCALE: 648mm (25.5″)
RADIUS: 356mm (14″)
Strings in setup: Galli Strings / .012-.053 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment
Specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial Number
18048
Country of manufacture
Japan
Case
Non-genuine gig case
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right
Fret Remaining
No problem, fret height is sufficient
String Height Low String Side
2.2mm above 12th fret
String height on treble string side
1.7mm above the 12th fret
Nut width
43.8mm
Neck thickness near 1st fret
21.0mm
Scale
648mm (25.5″)
RADIUS
356mm (14″)
Strings for setup
Galli Strings / .012-.053 set
Repair and Maintenance
Cleaning, string replacement, rod adjustment
Reviews
There are no reviews yet.