[SN 211520012] USED Gibson USA Gibson / Les Paul Standard 50s Heritage Cherry Sunburst [20]

Description

The maple top, mahogany body without weight relief, and 50’s rounded neck are ideal for players seeking a Les Paul Standard of the past.
The Burstbucker 61 (Neck)/Burstbucker 61 (Bridge) pickups are well known for their performance and allow the player to express the subtle nuances of the left hand, the strength of the picking, and the delicate control of volume.
Hand-wired electrical components include an orange drop capacitor.
Keystone pegs, wire-free ABR bridge, aluminum bridge tailpiece, and other vintage-inspired features.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and nut adjusted after our arrival, so it is in good playing condition.

There are some parts have some cusps and there are some buckle scratches.
There are other overall signs of use such as minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: Made in 2022
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Hard case / Genuine
Country of Origin USA
Weight 4.19kg
Serial 211520012

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.3mm
Neck thickness(near 1st fret)|22.5mm
Neck thickness (near 12th fret)|25.1mm
SCALE|624mm (24.56″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.3mm

Neck Thickness (near 1st fret)
22.5mm

Neck Thickness (near 12th fret)
25.1mm

Scale
624mm (24.56″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, nut adjustment