[SN Z0301E766] USED Hofner HI-BB-PE Ignition Bass Sunburst [20]

Description

Hofner’s Ignition Bass is a cost-performance model based on the widely popular “500/1” model, commonly known as the “Beetle Bass.
Ignition means ignition device, and this model is recommended as a return from blanks or as an introduction to electric bass.
The neck is a short scale of 30 inches (76.2 cm), so it is recommended for those with small hands or beginners.
It has a soft and poppy sound that can only be achieved with a lightweight hollow body.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated (from the 15th fret), and the 2nd string peg greased, so it is in good playing condition.

It is in good condition with only minor scratches.

Item rank: A (Beautiful)

Truss rod: There is room to spare.
Fret: 60-70%.
Accessories Soft case / Genuine
Country of origin: CNINA
Weight 2.34kg
Serial Z0301E766

Truss Rod: No problem, confirmed up to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.7mm
Neck thickness(near 1st fret)|23.8mm
Neck thickness (near 12th fret)|25.8mm
SCALE|762mm (30″)
RADIUS|508mm (20″)
Strings in setup|Aria ProII AGS-600M / .045-.100 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment (15th fret and after), 2nd string peg grease up

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
43.7mm

Neck Thickness (near 1st fret)
23.8mm

Neck Thickness (near 12th fret)
25.8mm

Scale
762mm (30″)

RADIUS
508mm (20″)

Strings for setup
Aria ProII AGS-600M / .045-.100 set

Repair and maintenance parts
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing (from the 15th fret), and peg lubrication on the 2nd string