Description
The Hype GTR series is a staple of Ormsby!
The aggressive design and multi scales give it a distinctive look. The fretboard is made of stainless steel with 24 frets and a D-shaped neck. The neck joint is curved to allow comfortable fingering and position movement from any fret.
There are some minor scratches and dents.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: GTR01407
Country of manufacture: Korea
Case: Original hard case
Weight: 3.21kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 47.0mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 21.6mm
SCALE: 648mm (25.5″)-698mm (27.5″)
RADIUS: 406mm (16″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
GTR01407
Country of manufacture
Korea
Case
Genuine hard case
Weight
3.21kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
47.0mm
Neck thickness near 1st fret
20.3mm
Neck thickness near 12th fret
21.6mm
Scale
648mm (25.5″)-698mm (27.5″)
RADIUS
406mm (16″)
Strings for setup
ERNIE BALL 2221 / .010-.046 set
Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.