[SN MIJ T036338] USED Fender Japan / TL55 Mod US Blonde [11]

Description

The carefully selected ash body and one-piece maple neck are equipped with Texas Special pickups.
The vintage sound of this guitar was not only emphasized, but also the parts such as the bridge with brass saddles were carefully selected.
It has a light crunch tone with a sense of attack and a sharp aggressive drive sound that is very Telecaster-like.

The front pickup has been replaced with Seymour Duncan STR-2.
Pickguard and pickguard screws have been replaced.
Bridge may have been replaced as the bridge screws are not negative.
There is a TL52 USB stamp on the neck pocket, but we have determined that it is a TL55 since the TL52 does not have a USB color in the lineup.
There are some scuffs and dings, but no noticeable scratches.
The neck is in good playing condition with no noticeable abnormalities.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: T036338
Year of manufacture: 2007-2010
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.91kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 25.0mm
SCALE: 648mm (25.5″)
RADIUS: 184mm (7.25″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

Specs and specifications are as follows

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
T036338

Year of manufacture
2007-2010

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.91kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
22.5mm

Neck thickness near 12th fret
25.0mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair