Description
Cost-effective model of Fernandes.
Excellent cost-performance model from Fernandez, the original domestic brand!
It was probably manufactured in the 2010’s. The body shape is the brand’s dinky shape “FGZ”. The body shape is the brand’s dinky shape “FGZ” and the body material is mahogany. The neck is maple with a “Set-Neck Through” finish reminiscent of a through neck. The fretboard is 24F with a rosewood fingerboard, and the fretboard surface is finished with a much thinner neck shape overall, which together with the thicker frets, boasts high playability.
The front pickup is an Epiphone 57CH, and the rear is unknown, but it has “SAM SUNG” engraved on it. The pots have been replaced accordingly.
The battery box on the back of the body is a dummy. The pegs have been replaced with normal type.
There are scratches, scuffs, line scratches, and dents on the body. There are picking scratches on the right side of both PUs. There is a toe-shaped ding on the top of the body at the right neck and a rice grain-sized ding on the horn on the 6th string side. There is a fine buckle scratch on the upper left side of the body back. There is a toe-shaped dent on the lower right side of the body back. There is a string strike mark on the fretboard surface under the 6th string on the 3rd fret.
The neck is slightly twisted and wavy, but in playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: 001685
Country of manufacture: Japan
Case: Gig Case
Weight: 3.37 kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, wiring correction
Specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
001685
Country of manufacture
Japan
Case
Gig Case
Weight
3.37kg
Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right.
Remaining frets
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Strings in setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, wiring correction
Reviews
There are no reviews yet.