[SN 054852] USED YAMAHA Yamaha / SG2000 Cherry Sunburst [20]

Description

The SG series SG2000 is YAMAHA’s greatest masterpiece, which is still gaining popularity in Japan and abroad.
Hard maple T-cross maple top reminiscent of Les Paul, seamless through-neck construction with integrated neck and body.
High-grade ebony fingerboard.
Equipped with a bi-sound system that switches the humbucker of each PU to single coil sound by pushing/pulling the front and rear tone controls.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and electrical repair have been done.
The frets are dented and the neck is twisted and wavy, but there is no sound blockage.

The overall appearance of the guitar is cloudy, and the gold parts have peeling plating, scratches, and dings with paint dents.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fret : Less than 50%.
Accessories Hard case / Non-genuine
Country of Origin JAPAN
Weight 4.78kg
Serial 054852

Truss Rod : No problem, confirmed up to 60 degrees to the left and right (torsion and waviness)
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|24.4mm
SCALE|628mm (24.75″)
RADIUS|432mm (17″)
Strings at setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
19.8mm

Neck Thickness (near 12th fret)
24.4mm

Scale
628mm (24.75″)

RADIUS
432mm (17″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair